Microhardness measurements of paint coatings shorten weathering tests
Paint for architectural coatings is not only used to give surfaces an attractive appearance, but also plays a very important role in protecting facades against external damage and corrosion. To avoid waiting years to see if the coating really protects the surface, simulating and measuring weathering influences is necessary.
Paint coating systems are exposed to severe environmental influences like strong temperature variations, moisture and aggressive media such as acid rain, insect residue or strong cleaning agents. Facade coatings should withstand such influences and have quality characteristics such as light fastness, weathering resistance and easy cleaning.
The characteristics of such coatings depend not only on the thickness, but also on hardness, elasticity, degree of polymerisation and resistance to UV radiation. These parameters can be determined using the instrumented indentation test.
To demonstrate weathering influences, measurements were performed on samples with original surfaces (reference), on samples after 400 hours of QUV radiation (equipment weathering) and after 1 year Florida exposure test (outdoor weathering).
Fig. 1: Influence of weathering on the Martens Hardness of polyester powder coating.
The reference sample (green plot) without weathering does not show a hardness increase at the surface. The sample exposed to weathering outdoors for 1 year in Florida shows a slight increase of hardness near the surface. The sample exposed to QUV irradiation for 400 hours shows the largest hardness gradients. Reason therefore is a change in the molecular structure of the paint. Cross-linking of the paint molecules lead to an increase in hardness caused by the repeated alternation of drying, moistening and irradiation. As outdoor weathering often spans a number of years and involves very expensive sample holders and large standing areas, artificial weathering is used to simulate such outdoor weathering.
With the FISCHERSCOPE® HM2000 hardness measuring instrument, the effects of weathering tests can be measured easily and accurately, therefore saving costs and shortening time compared to outdoor testing significantly. Ask your local FISCHER representative for further information.
FISCHER iletişim bağlantınız
Endüstriyel Segment Ortağı
Yılmer Test ve Ölçü Sistemleri Sanayi ve Ticaret ltd. Şti.
Burhaniye Mah. Fatih Sultan Mehmet Sokak No. 29/5, 34676 Üsküdar, Istanbul
Tel.: +90 216 318 10 01
On-line iletişim formu
Kuyumculuk Segmenti Ortağı
Piramit Teknik Malzeme ve San. Tic. A.Ş
Vizyon Park, C1 blok Zemin kat, No:39-40 Yenibosna, 34197 istanbul
Tel.: +90 2125111186
On-line iletişim formu